Hatzegopteryx — Image unavailableHatzegopteryx
Meaning of the name«Hațeg basin wing»
- Lived
- Late Cretaceous period
- First found
- 2002
- Found in
- Romania
Hatzegopteryx belongs to the “Flying creatures” section. Lived: Late Cretaceous period. Size: wingspan 12 m. First found in 2002, Romania. The name means “Hațeg basin wing”. In battles on our site it beats 45 of 47 rivals.
Hatzegopteryx is a genus of azhdarchid pterosaur found in the late Maastrichtian deposits of the Densuş Ciula Formation, an outcropping in Transylvania, Romania.
It is known only from the type species, Hatzegopteryx thambema, named by Buffetaut et al. in 2002 based on parts of the skull and humerus. Additional specimens, including a neck vertebra, were later placed in the genus, representing a range of sizes. The largest of these remains indicate it was among the biggest pterosaurs, with an estimated wingspan of 10 to 12 metres (33 to 39 ft).
Unusually among giant azhdarchids, Hatzegopteryx had a very wide skull bearing large muscular attachments; bones with a spongy internal texture instead of hollow; and a short, robust, and heavily muscled neck measuring 1.5 metres (5 ft) long, which was about half the length of other azhdarchids with comparable wingspans, and was capable of withstanding strong bending forces. Hatzegopteryx inhabited Hațeg Island, an island situated in the Cretaceous subtropics within the prehistoric Tethys Sea. In the absence of large theropods, Hatzegopteryx was likely the apex predator of Hațeg Island, tackling proportionally larger prey (including dwarf titanosaurs and iguanodontians) than other azhdarchids.
The first pterosaur remains from Romania were identified by Franz Nopcsa in 1899, and the first remains of Hatzegopteryx were found during a student dig during the late 1970s from the upper part of the Middle Densuş Ciula Formation of Vălioara, northwestern Hațeg Basin, Transylvania, western Romania, which has been dated to the late Maastrichtian stage of the Late Cretaceous Period, around 66 million years ago. The holotype of Hatzegopteryx, FGGUB R 1083A, consists of two fragments from the back of the skull and the damaged proximal part of a left humerus. One of these fragments, namely the occipital region, was initially referred to a theropod dinosaur when it was first announced in 1991. A 38.5 cm (15.2 in) long middle section of a femur found nearby, FGGUB R1625, may also belong to Hatzegopteryx. FGGUB R1625 would have belonged to a smaller individual of Hatzegopteryx (assuming it pertains to the genus), with a 5 to 6 m (16 to 20 ft) wingspan. Additional reported specimens from the locality include an unpublished mandible, also from a large individual.
The skull of Hatzegopteryx was gigantic, with an initially estimated length of 3 metres (9.8 ft) based on comparisons with Nyctosaurus and Anhanguera, making it one of the largest skulls among non-marine animals. The skull was broadened in the rear, being 0.5 metres (1 ft 8 in) wide across the quadrate bones. While most pterosaur skulls are composed of gracile plates and struts, in Hatzegopteryx the skull bones are stout and robust, with large ridges indicating strong muscular attachments. In 2018, Mátyás Vremir concluded that Hatzegopteryx likely had a shorter and broader skull, the length of which he estimated at 1.6 metres (5 ft 3 in).
The massive jaw bore a distinctive groove at its point of articulation (also seen in some other pterosaurs, including Pteranodon) that would have allowed the animal to achieve a very wide gape. Unpublished remains attributed to Hatzegopteryx suggest that it had a proportionally short, deep beak, grouping with the "blunt-beaked" azhdarchids rather than the "slender-beaked" azhdarchids (including Quetzalcoatlus sp.).
A large neck vertebra attributed to Hatzegopteryx is short and unusually robust. The preserved portion measures 240 millimetres (9.4 in) long, with the entire vertebra likely measuring 300 millimetres (12 in) long in life. Pterosaurs had nine neck vertebrae; regression indicates that the third to seventh cervical vertebrae would have collectively measured 1.508 metres (4 ft 11.4 in) in length, with the longest vertebra - the fifth - only measuring approximately 400 mm (16 in) long. Meanwhile, the same vertebrae in the similarly giant Arambourgiania measured 2.652 metres (8 ft 8.4 in); this indicates that the neck of Hatzegopteryx is about 50–60% the length of what would be expected for a giant azhdarchid of its size.
The bottom surface of the neck vertebra was also unusually thick, at 4 to 6 millimetres (0.16 to 0.24 in). For most other giant azhdarchids, including Arambourgiania, this surface is less than 2.6 millimetres (0.10 in) thick. Although the neural spine of the vertebra is not completely preserved, the width of the preserved portion suggests that it was relatively tall and robust relative to those of other pterosaurs. Other aspects of the vertebra converge upon the seventh neck vertebra of the smaller Azhdarcho most closely: the articulating sockets (cotyles) are much shallower than the neural arches, and are four times as wide as they are tall; a process on the bottom of the vertebrae, known as a hypapophysis, is present; the processes at the front of the vertebrae, the prezygapophyses, are splayed; and the vertebra has a tapered "waist" in the middle of the centrum. Although initially identified as a third neck vertebra, these traits supports the identification of the vertebra as coming from the rear of the neck, more specifically as being the seventh vertebra.
The size of Hatzegopteryx was initially estimated by comparing the 236 mm (9.3 in) humerus fragment with that of Quetzalcoatlus northropi, which has a 544 mm (21.4 in)-long humerus. Observing that the Hatzegopteryx fragment presented less than half of the original bone, Buffetaut et al. established that it could possibly have been "slightly longer" than that of Quetzalcoatlus. The wingspan of the latter had been estimated at 11 to 12 metres (36 to 39 ft) in 1981; earlier estimates had strongly exceeded this at 15 to 20 metres (49 to 66 ft). They concluded that an estimate of a 12 metres (39 ft) wing span for Hatzegopteryx was conservative, "provided that its humerus was longer than that of Q. northropi". In 2010, Mark Witton and Michael Habib concluded that Hatzegopteryx was probably no larger than Q. northropi in wingspan; the initial conclusions did not account for distortion of the bone. The latter is generally estimated at 10–11 metres (33–36 ft) in length.
It has been suggested, on the basis of the wide and robust neck vertebra referred to Hatzegopteryx, that the entire vertebral column of the animal was similarly expanded, increasing its overall size. However, this is likely not true, since the neck vertebrae of large pterodactyloids generally tend to be wider and larger than the rest of the vertebrae. Although estimates of pterosaur size based on vertebrae alone are not particularly reliable, the size of this vertebra is consistent with an animal that measured 10 to 12 metres (33 to 39 ft) in wingspan.
Similarities between the humerus of Hatzegopteryx and Quetzalcoatlus northropi have been noted; both have a long, smooth deltopectoral crest, and a thickened humeral head. These were initially the basis of the taxon's referral to the clade Azhdarchidae, but they are also similar enough to be a basis for the synonymy of Hatzegopteryx and Quetzalcoatlus. However, this is likely due to the relatively non-diagnostic nature of the humerus in giant azhdarchid taxonomy, and the lack of a detailed description for the elements of Q. northropi. However, the neck and jaw anatomy of Hatzegopteryx is quite clearly distinct from the smaller Q. sp., which warrants the retention of Hatzegopteryx as a taxon separate from Quetzalcoatlus.
Based on Wikipedia materials ·Article on Wikipedia ·Text available under CC BY-SA 4.0







